Beam flange clamps are designed to clamp onto a steelwork flange and provide a suspension point for supporting building services. It has a front clamping screw with a cup point that bites into the steel and is then locked in place with a locknut to ensure a secure fixing to the steel. The back hole of the clamp can be tapped or have a clearance hole to accept threaded bar of M06, M08, M10 & M12 sizes.
Beam clamps are designed to provide attachment of hanger rods to structural steel without drilling or welding. Various types of beam clamps and sizes are available for numerous applications.
Materials: Carbon Steel, Malleable Iron and Forged Steel are used in the manufacturing of beam clamps. Other materials are also available.
Finishes: Finishes for beam clamps are Plain Steel, Electro-Plated Zinc, Hot Dipped Galvanized, Red Primer, Plastic Coating, Stainless Steel and other special coatings are also available.
Beam clamps M8/M10/M12 with a steel set screw & lock nut
Material: ductile iron QT450-10
Finish: zinc plated
With two bottom tapped (or unthreaded) holes
Beam clamps M8/M10/M12 with a steel set screw & lock nut
Material: ductile iron QT450-10
Finish: zinc plated
With two bottom tapped (or unthreaded) holes
Beam clamps M8/M10/M12 with a steel set screw & lock nut
Material: ductile iron QT450-10
Finish: zinc plated
With two bottom tapped (or unthreaded) holes
Beam clamps M8/M10/M12 with a steel set screw & lock nut
Material: ductile iron QT450-10
Finish: black phosphate
With two bottom tapped (or unthreaded) holes
Beam clamps M8/M10/M12 with a steel set screw & lock nut
Material: ductile iron QT450-10
Finish: Dacromet
With two bottom tapped (or unthreaded) holes
Top beam clamp 3/8" with a steel set screw & lock nut
Material: ductile iron QT450-10
Finish: electro-galvanized
With one bottom tapped hole
Beam clamps M6/M8/M10/M12 with a stainless steel set screw & lock nut
Material: 316 stainless steel
Finish: none
With one bottom tapped hole
Flange beam clamps with a steel set screw & lock nut
Material: ductile iron QT450-10
Hole type: plain (drilled) or tapped
Hole size: Φ7mm, M6 | Φ9mm, M8 | Φ11mm, M10 | Φ13mm, M12
Clamping thickness: 3 - 28mm
Suits M6, M8, M10 or M12 threaded bar
316 Stainless Steel Beam Clamp M10
Beam clamp M10 with a stainless steel set screw & lock nut
Material: 316 stainless steel
Finish: none
Clamping thickness: 3 ~ 18mm
With two bottom unthreaded holes Φ10mm
Suits M10 threaded bar
Trustworthy Supplier of Cast Iron Beam Clamps
Committed to provide quality beam flange clamps that meet all your needs.
